16x40' Oval Caribbean Beaded Pool Liner (52")

BEADED POOL LINERS: These types of swimming pool liners differ from others by the method of installation. Beaded Pool liners simply go up the pool wall then snap into a track using the bead that runs along the liners entire edge. This track the liner snaps into is referred to as the bead receiver, and runs continuously along the top of the pool wall. Beaded pool liners usually have a decorative top border. Beaded liners are usually easier to install because most of the time you do not have to take off the top rail of the pool in order to change the liner. This type of liner works very well in situations where a large deck is built around the pool, or if the pool is sunk into the earth. Converting an existing swimming pool with an overlap liner, to a pool with a beaded liner, is easily accomplished by installing the bead receiver onto the wall and installing the right height liner. Beaded pool liners come in 3 sizes, 48", 52", or 54" wall heights. If there is any height adjustment that needs to be made, this needs to be done by removing or building up the height of the "cove" located at the base of the pool wall within the pool. Cove is available in "wedge" shaped Styrofoam or sand can be used by compacting it into the corner where the wall meets the floor.